wood veneer dryer; wood drying machine; roller veneer dryer; veneer sheet dryer-manufacture,factory,supplier from China

The demand for wood veneer dryer is increasing year by year,and it has been recognized and purchased by consumers.Traditional natural air-dried wood is prone to problems such as deformation and cracking.The use of wood dryer equipment can effectively solve this problem.The cost of dryer equipment is high, so basic maintenance needs to be done in the later use process,such as the ground,ventilation system, gate,instrument,heating system and debugging system,etc.The specific operations are as follows:1.The floor of the wood dryer equipment should be kept clean and tidy,and the debris should be c

Wood veneer needs to be dried before use, so that the wood is not prone to problems in future use, and the dried sheet is easier to save.

Recently, a brand new veneer dryer from our company is being sent to the customer's factory. After many inspections, the customer finally chose us. We specially customize the production according to the customer's veneer size to ensure that the output of the veneer dryer meets the customer's production needs. It can be used to dry various wood species.

Recently, our new customer successfully installed and put into use the 2 deck veneer dryer provided by our company. During normal operation, the veneer dryer has successfully completed the efficient drying of rubber wood veneers. Normal drying of rubber wood veneers can be dried to zero water, and the drying effect is satisfactory. It not only greatly improves the production efficiency of veneer processing, but also shows great advantages in environmental protection and energy saving.

Recently, the 2 deck veneer dryer purchased by our customers has been installed. Our engineers went to guide the installation and will return only when the equipment is operating normally. Equipped with a biomass burner, it can directly burn bark to save fuel costs. We welcome customers to visit the customer site to inspect the drying equipment.The roller veneer dryer is a new generation of wood veneer drying equipment. It uses the latest international pressurized contact veneer drying technology.

The 2nd set veneer roller dryer ordered by the customer in Yunnan started the test running. The veneer dryer is heated with thermal oil. The wood specie is birch. Drying capacity is 70-80 CBM per day.  

The wood veneer dryer needs to pay attention to some problems when drying wood. Before use, it should start the heating fan and start the speed regulating motor when reaching the drying temperature. The veneer should be entered longitudinally from the feed port, the feed should be straightened, the veneer and the drive roller into a 90 degree feed connection, before drying the veneer should be cut neatly. Drying should master the moisture content, according to the moisture content of the board, adjust the speed of the motor.Precautions for operation of wood veneer dryer1.

With the perfect end of the Turkish International Woodworking Exhibition, our boss went to our Latvian customer's factory to meet with the customer. During this period, we welcome customers to visit the site. The shine veneer dryer can be equipped with a variety of heat sources, the equipment is stable, the failure rate is low, and the board is flat and wrinkle-free after drying.

Choose the regular veneer dryer manufacturer's equipment, in order to ensure the quality of wood after drying.

The roller veneer dryer purchased by the Russian customer has been delivered, together with our biomass burner. Biomass burner is our patented product, which can directly burn waste wood and save cost.