Dry Veneer-manufacture,factory,supplier from China

The demand for wood veneer dryer is increasing year by year,and it has been recognized and purchased by consumers.Traditional natural air-dried wood is prone to problems such as deformation and cracking.The use of wood dryer equipment can effectively solve this problem.The cost of dryer equipment is high, so basic maintenance needs to be done in the later use process,such as the ground,ventilation system, gate,instrument,heating system and debugging system,etc.The specific operations are as follows:1.The floor of the wood dryer equipment should be kept clean and tidy,and the debris should be c

Pine is considered one of the most difficult woods to dry, mainly due to its wood structure and composition.1. Uneven density: Pine fibers are relatively fine and soft, resulting in uneven density inside the wood. This makes the wood dry at an inconsistent rate, prone to cracking and warping.2. High moisture content: Compared with other woods, pine has a higher moisture content. It takes longer for the moisture inside the wood to evaporate completely.

Pine is considered one of the most difficult woods to dry, mainly due to its wood structure and composition.1. Uneven density: Pine fibers are relatively fine and soft, resulting in uneven density inside the wood. This makes the wood dry at an inconsistent rate, prone to cracking and warping.2. High moisture content: Compared with other woods, pine has a higher moisture content. It takes longer for the moisture inside the wood to evaporate completely.

Recently, a brand new veneer dryer from our company is being sent to the customer's factory. After many inspections, the customer finally chose us. We specially customize the production according to the customer's veneer size to ensure that the output of the veneer dryer meets the customer's production needs. It can be used to dry various wood species.

     The products can also be used as other tunnel wood drying equipment, especially suitable for wood with an initial moisture content of about 28% and a moisture content of 10-8%, which can dry the wood in a short period of time, and can also dry the wood crafts, decorations and special standard wood.     The dehumidification working principle of the veneer dryer is to use the unsaturated wet air to dry the wood to absorb the moisture in it, and at the same time, in order to improve the moisture absorption of the wet air, the moisture is heated first.

The double deck veneer dryer purchased by a Thai customer and our biomass burner can dry the veneer with uniform moisture content and high output.The customer is very satisfied with this,and will purchase our equipment if there is more demand. .We are very grateful to our customers for their support.

Our customer in Guizhou put into production a 4 deck veneer dryer equipped with 15 tons of biomass burner. In addition to drying the first-level veneer, the customer also used to dry the second-level veneer and the three-level single-level veneer, and the feedback effect was very good.

Recently, the 2 deck dryer ordered by our customers has been completed and is ready for delivery. It is equipped with a biomass burner and can directly burn bark. The output can reach 80 cubic meters. It is used to dry rubber wood veneers. Before placing an order, the customer went to another customer's site for a field inspection and was very satisfied with the equipment. After that, he decided to purchase it.

A veneer drying equipment ordered by a Thai customer has been installed and tested. It is equipped with a biomass burner, which can directly burn the bark to save fuel costs. Our professional engineers went to the customer's factory to guide the installation and trained the factory workers to operate it skillfully. It is used to dry rubber wood.Using new upgraded technology, compared with traditional veneer dryers, it has better drying effect, flat and wrinkle-free, simple operation, stable equipment, low failure rate, and effectively improves the output of the roller dryer.

A veneer dryer is a crucial piece of equipment in the woodworking industry that helps to dry out and stabilize veneer sheets, ensuring they are suitable for use in a variety of applications. One critical component of a veneer dryer is the heat source used to generate the required temperature and humidity levels for effective drying.