Birch Wood Veneer Dryer-manufacture,factory,supplier from China

The demand for wood veneer dryer is increasing year by year,and it has been recognized and purchased by consumers.Traditional natural air-dried wood is prone to problems such as deformation and cracking.The use of wood dryer equipment can effectively solve this problem.The cost of dryer equipment is high, so basic maintenance needs to be done in the later use process,such as the ground,ventilation system, gate,instrument,heating system and debugging system,etc.The specific operations are as follows:1.The floor of the wood dryer equipment should be kept clean and tidy,and the debris should be c

Birch veneer has a high shrinkage rate after drying because it is made up of thin layers of wood that have been peeled or sliced from the birch log. When the veneer is dried, the moisture is removed from the wood, causing it to shrink in size.There are several factors that can contribute to the high shrinkage rate of birch veneer after drying. One of the main factors is the orientation of the wood fibers. Birch veneer is typically sliced or peeled from the log in a direction that follows the grain of the wood.

The 2nd set veneer roller dryer ordered by the customer in Yunnan started the test running. The veneer dryer is heated with thermal oil. The wood specie is birch. Drying capacity is 70-80 CBM per day.  

Recently, our new customer successfully installed and put into use the 2 deck veneer dryer provided by our company. During normal operation, the veneer dryer has successfully completed the efficient drying of rubber wood veneers. Normal drying of rubber wood veneers can be dried to zero water, and the drying effect is satisfactory. It not only greatly improves the production efficiency of veneer processing, but also shows great advantages in environmental protection and energy saving.

Recently, a brand new veneer dryer from our company is being sent to the customer's factory. After many inspections, the customer finally chose us. We specially customize the production according to the customer's veneer size to ensure that the output of the veneer dryer meets the customer's production needs. It can be used to dry various wood species.

Choose the regular veneer dryer manufacturer's equipment, in order to ensure the quality of wood after drying.

Wood veneer needs to be dried before use, so that the wood is not prone to problems in future use, and the dried sheet is easier to save.

Are you worried that the output of the veneer dryer you bought cannot reach the output? Or have you already purchased it but the expected output has not been achieved? The main reasons are as follows:First: the type of wood to be dried. Some special woods will take longer to dry.Second: the initial moisture content and final moisture content of the dried veneer.

Wood veneer is required to be dried in the veneer dryer to remove the moisture content present in it. Moisture content in wood veneer can cause several problems such as warping, cracking, splitting, and decay of the wood, which can lead to a reduction in the quality and value of the veneer.During the veneer manufacturing process, the logs are first peeled into veneer sheets using a lathe or a slicer. These veneer sheets are then sorted, graded, and stacked for drying.

     The products can also be used as other tunnel wood drying equipment, especially suitable for wood with an initial moisture content of about 28% and a moisture content of 10-8%, which can dry the wood in a short period of time, and can also dry the wood crafts, decorations and special standard wood.     The dehumidification working principle of the veneer dryer is to use the unsaturated wet air to dry the wood to absorb the moisture in it, and at the same time, in order to improve the moisture absorption of the wet air, the moisture is heated first.